By continuing to browse you are accepting this.
Fold the A3 card in half to create an A4 card blank. Use your bone folder to reinforce the fold. Measure across the front from the right to 4cm and cut down the front of the card.
Take an A4 piece of red card and measure across the short edge to 4cm. Cut down the card at this mark. Blend distress ink around the edges of the large piece of red card and the smaller strip. Cover the front with the large piece attaching with double sided tape or glue. Attach the strip to the inside back along the right hand edge.
Print two co-ordinating backing papers onto paper and a design sheet onto card.
Cut the backing papers so that half of one is at the top and half at the bottom. Attach to the front. Cut strips of the same backing paper and attach to the inside strip the opposite way round.
Attach a ribbon strip across the joins.
Cut out two toppers and the decoupage elements from the design sheet. Make up using foam pads then attach to the front of the card.
Add extra elements to finish off.